Waterproof Tile Adhesive Chemical Adhesive For Water Retaining Arc Adhesive

Waterproof Tile Adhesive Chemical Adhesive for Water Retaining Arc adhesive

Ceramic tile adhesive is a kind of cement as the base of polymer modification of high quality adhesives, flexibility and quick drying, thickness is suitable for construction, its special formula can make its stickup ceramic tile on the various types of substrate. The composition of cement, quartz sand and enrichment tackifier, the adhesive compared with existing technology, a wide range of construction, strong adhesion, easy construction, ceramic tile, ground and wall not soaked with water, hardening time long before construction, construction personnel have adequate adjustment time to wait for a characteristic, therefore, has great value in use. Ceramic tile adhesive, it can make up for the defect of cement and normal polymer mortar, due to its good water proofing property, caking property and durability, to overcome the ordinary cement, waterproof mortar or ordinary floor tile of wall of binder paste material of tile adhesive, empty drum, crack, fall off and water penetration, performance instability, etc, from building palisade structure waterproof plaster to construction finishing materials, waterproof bond show superior performance. It is based on the theory of "organic - inorganic matter", which is mixed with the optimum polymer blending and strictly controlled the mixing ratio of materials such as polymers. It has the characteristics of inorganic cement, and it has the characteristics of organic glue high bonding degree, which is waterproof and adhesive. It is the ideal waterproof adhesive material for conventional cement and ordinary polymer mortar.

Classification editor of ceramic tile adhesive

Currently, there are three types of adhesive adhesives that are common in the market:

The first is a rapid adhesive

When used on the back of wall surface and the ceramic tile daub a layer of adhesive solution, thin air buy minutes later, with the hand touch of glue not glue the hand, on the wall pressure can, use very convenient.

The second is the jd-503 tile adhesive

The product is white powder, and it is mixed with water. This product not only has a strong adsorption force, but also has a certain time to be able to make paste adjustment, the glue that adjust the glue should be used in 4 hours. The average gel thickness is between 3 and 5 mm.

The third type is 903 multi-functional building glue

This product is strong in bond strength and can be adjusted within two hours. The thickness of the adhesive is 2mm, which is very convenient. Choose the adhesive stick of finished product, the cost is higher, suitable in the surface of the wall surface is very smooth and choose, otherwise the stickup cost increases.

The method that the paste wall brick in the home decorates a wall to make the place to make 107 glue cement jelly commonly. To cement 2107 glue 2 water = 100210220 volume modulation qi mushy slurry, adhesive thickness within the 5 mm, time can be adjusted for several hours, the wall surface requirement is low, is the most economic and practical paste glue.