Tile Adhesive Features

   Tile Adhesive Tile adhesives are non-toxic, odorless, non-polluting environmentally friendly products. It can greatly improve the bonding material and the bonding strength between the substrate, anti-slip, with good water resistance, acid and alkali resistance and aging resistance, can withstand dry and wet alternating and hot and cold alternately test, completely solve The direct use of cement paste the various drawbacks.

   Tile Adhesive Tile adhesives to reduce the traditional construction technology on the grass-roots sprinkler and immersion brick process dependencies, better to avoid the immersion bricks, water is not enough. Mix a bag of material according to the specified water distribution ratio, stir until homogeneous without agglomeration, let the slurry stand for 3 to 5 minutes, then stir once again, you can use. Select the appropriate Tooth Scraper to ensure that the effective paste area is at least 65% of the area of the board, tile, etc. With a special tooth-type scraper mortar full of the base surface 3 to 5 mm thick, and then with a scraper with a tooth side of the straight line or S-shaped stripes, scraper plane and the base plane intersection was 45 degrees to 60 degrees. Tiles do not have to be soaked in water, simply past the wall / ground and compaction. And adjust the tile position within the specified time. The dry mortar can be removed with water, but can only be removed by mechanical means after curing.

   Tile Adhesive Roughly estimate that the use of traditional cement and sand on the ground mixing mortar to the traditional thick paste method to paste the tile, the annual consumption of yellow sand, cement up to 10,440 million tons, and with a new tile adhesive products using thin stickers Paste, only about 232 billion tons, significant savings in resources. In addition, the use of traditional paving a skilled worker can only shop 7 to 8 square meters a day, and the use of ceramic tile products for thin bed paving method, a worker can be built up to 25 square meters a day, greatly improving the work efficiency The

   Tile Adhesive The traditional ceramic tile binder cement mortar, the mortar of the weak bonding, durability is poor, easy to peel off, and the use of mixing and thick layer of construction, the ratio of instability, affecting the durability of tiles, waste of raw materials , But also affect the construction speed, pollution of the environment, its security can not be guaranteed, it is prone to security incidents.