Interior Tile Adhesive Polymer Modification

Interior Tile Adhesive Polymer modification

Ceramic tile adhesive is a kind of cement as the base of polymer modification of high quality adhesives, flexibility and quick drying, thickness is suitable for construction, its special formula can make its stickup ceramic tile on the various types of substrate. The composition of cement, quartz sand and enrichment tackifier, the adhesive compared with existing technology, a wide range of construction, strong adhesion, easy construction, ceramic tile, ground and wall not soaked with water, hardening time long before construction, construction personnel have adequate adjustment time to wait for a characteristic, therefore, has great value in use. Ceramic tile adhesive, it can make up for the defect of cement and normal polymer mortar, due to its good water proofing property, caking property and durability, to overcome the ordinary cement, waterproof mortar or ordinary floor tile of wall of binder paste material of tile adhesive, empty drum, crack, fall off and water penetration, performance instability, etc, from building palisade structure waterproof plaster to construction finishing materials, waterproof bond show superior performance. It is based on the theory of "organic - inorganic matter", which is mixed with the optimum amount of polymer and strictly controlled the mixing ratio of materials such as polymers. It has the characteristics of inorganic cement, and has the characteristics of high adhesion to organic glue. It is waterproof and cohesive. Is an alternative to conventional cement and ordinary polymer mortar, the most ideal waterproof adhesive material in modern middle and high grade buildings.

Classification and editing of ceramic tile adhesive

At present, there are three common adhesives for sticky tiles in the market:

The first is a rapid adhesive

When using, apply a layer of glue on the surface of the wall and on the back of the tile. After a few minutes, it is easy to use the upper wall when the hand is not sticky.

The second type is jd - 503 tile adhesive

The product is white powder, and the water is added to the viscose gel. This product not only has a strong adsorption capacity, but also has a certain time to be able to make paste adjustment, the gelatine should be used in 4 hours. The average gel thickness is between 3 and 5 mm.

The third type is 903 multi-functional building glue

This product has a high bond strength and can be adjusted within 2 hours. The glue thickness is 2 mm and it is very convenient to use. Choose the product adhesive paste, the cost is higher, suitable for the surface of the wall at the base surface is very smooth choice, or the paste cost will be increased.

The method that the paste wall brick in the home decorates a wall to make 107 glue cement jelly commonly. To cement 2107 glue 2 water = 100210220 volume modulation qi mushy slurry, adhesive thickness within the 5 mm, time can be adjusted for several hours, the wall surface requirement is low, is the most economic and practical paste glue.

Performance profile editing

1. Excellent anti-aging, waterproof, anti-cracking, anti-seepage, alkali resistance, weather resistance, high temperature resistance and corrosion resistance. 2. Low shrinkage rate, strong water retention and strong adhesion to ceramic tiles. 3. Good construction performance, anti-sagging, anti-flow hanging, long adjustment time, and more guarantee of engineering quality. 4. Good flexibility, suitable for the deformation of base and tile, strong weatherability. 5. No brick and wet wall should be used in the construction, the process is simple, the construction is coherent, the construction speed is greatly accelerated, and the efficiency is improved. 6. It is easy to use and easy to build. Non - toxic, odorless, anti - alkaline strong, belong to environmental protection products.